Auburn Auto Machine

I have been trying to work out a planned 4month engine swap that only took 2 years and Mike and the boys were able to to figure out, after only having my heads for 2weeks I can finally complete my project with confidence. Thank you... this was the BEST CUSTOMER SERVICE during this process I have ever had! Now I have faith that I can wrap this up on my own.

I needed a custom part machined and threaded for a project, and Mike and his team took care of it no problem on time and within my budget. Super friendly, easy to work with, and they clearly know their stuff. I’ll definitely be back and would recommend them to anyone. Thanks again Mike!

Mike, and his employees are the greatest. The reason his employees are great is because Mike takes care of his employees, and Mike has enough knowledge to be able to show and coach his employees through a process they may be new at. I had a DZ302 motor stolen out of my shop, and through sheer luck found it almost three years later. After i picked it up the next day i dropped it off at AAM. Then i forgot it was there and Mike never said anything, like when are we going to build your motor. He is more then a businessman, and treats his customers like best friends. There is never and pressure and Mike is honest, and his prices are good. His employees are also very friendly towards their customers and you feel like your hanging out with best friends. Mike built the 302 with a few modifications that i requested like 3/8th pushrods instead of the stock 5/16th, and 7/16th studs on the heads for the valve train instead of the stock 3/8th. Several other tasks were done and the result is a motor that i had tested and got 457hp at the rear wheels. I have over 700 miles on the motor as in Arizona i don’t drive it in the late spring to early fall because of the heat. Mike was always available to answer questions when i was installing the motor. The result is, it doesn’t burn any oil or use any. He told me how to drive it to break it in and for how many miles which i followed to the letter. I also had him do a bronco motor as well. If i ever need another motor to be built, i will pay to have it shipped to AAM from Arizona, because out of the several shops here none come close in cost, knowledge and customer service, before, during and after any work is done. They are the best of the best.

Mike and his crew are an excellent source for any engine machining service! Mike took on my tiny 3 cyl motor helping me revive an old Subaru Justy. I’ve had some other Subaru engines taken care of here as well, the only shop I’d recommend to anyone building a motor of any size!

This was the first time I've gone to a machine shop to have work done. Mike was very helpful and spent a good half hour just doing a free inspection on my Subaru EJ25 block to let me know what he recommended and answered all of my questions without making me feel dumb or pressured. (I've been a technician at a dealer for many years but machine work is not my specialty.) I'm happy I picked his shop because he did a great job honing out the cylinders and filing my piston rings to fit, and at a decent price. It's also worth noting that his shop does most of the machine work for the Subaru shop InFront Automotive in Auburn and he's one of very few in the area that can do proper machine work on Subaru engines. Either way, I recommend this shop for whatever engine machining needs you need!