I brought in a big block Chevy crank that I had accidently pressed the flywheel pin in on the flange and needed it pressed back out so that it was back flush with the back side of the flange. Due to the limited space between the flange and thrust surface this was not just a simple press it out. Kevin took a look at it and after a few minutes came up with a plan and was able to get the pin pressed back where it should be and had it done by the end of the day. I have just moved to Ennis, nice to find good shops with good people!
View on GoogleI have change that edited my review many times to be honest it's an ongoing situation. I can't say that they have been great communicating and working with me. I will complete and post a final draft of this reviews when we are done. I spent a good sum of money and put my trust in them, I only hope we can come to a reasonable conclusion. Watch this review for updates as I will keep you informed. Watch my Facebook groups (10), Websites (3), Instagram, TikTok, and YouTube channels. I will work with them and hopefully it will all work out.
Update: Febuary 21, 2022 Still have not completed work, or explained what they did do, having issues and have not been responding to my texts. I have spent a lot of money with them and would like to complete the services. I am beginning to consider further action to resolve this. Stay tuned.
Update: March 18, 2018 Very dissapointed. After months of complaining to them, taking my vehicle back and redoing the same work at a cost of an addtional $1200 plus, and still not seeing any difference. My truck was running rought, blowing black smoke ( worse than usual ), sluggish, and with not much power. Then new switch was supposed to remedy this. I contacted them multiple times and told them I saw no difference in performance. They were also supposed to get a part to help me quiet it down. That never happened but I was told to be patient and they would notify me. I tried to be patient, but I had to turn down loads because of lack of pulling power, running rough and could not trust I would not break down. I finally took it to a very well known and highly recommended Diesel performance shop that was able to diagnose and evaluate the work they had done. I now have documented proof that all the work and money I had spent multiple times was for nothing. The other shop did the work I had paid twice to Big Stick, and with great service and skill. I now have what I had gone to Big Stick and trusted Justin to do. I hate this because I really liked Justin and trusted him, but this is my business and I feel I was taken, decieved or that with all thier busiess they did not follow through or take the time to confirm that the repairs they had done were working. I felt that at any time during our many conversations they could of said bring it in again and let us look at it. I was made to feel like I was bothering them and they were thinking I was complaining. My heart of hearts, does not feel this was intentional. I think there was other issues, not hooked up correctly, not taking the time to ensure that the work was done right. However as much as I contacted them, they should of addressed my concerns.
I don't like to bash or sully the reputation of small businesses as I have always owned several. If you follow me on many of my Media platforms, My Hotshot Trucking groups, My Google Reviews, You know that I tell it like I see it. I will be posting an aritcle on my Blog and websites soon after my Attorneys advise me. If you are thinking of using them, that is your business, but be sure that they follow through. I am not sure they may know enough about what they are doing. I had asked for the files of the work many times and they did not seem to know what I was talking about. I was able to see the files at the other business I ended up getting them to correct what Big Stick had or had not done.
View on Google