P0420 on a 2017 GMC Sierra 1500

P0420 means the downstream oxygen sensor pattern suggests the bank 1 catalytic converter is not storing oxygen properly.

Not your vehicle? See general P0420 info.

Most common causes on the 2017 GMC Sierra 1500

Ranked from 425 NHTSA owner complaints filed for this vehicle.

Sort by:

1
Chronic cylinder misfires from AFM/DFM lifter failures overheating the converter
High severity
Multiple owners on this platform report lifter-related misfires (P0304 lifter failure, pistons misfiring, cylinder 6/4 misfire); sustained misfires dump unburned fuel into the exhaust and can overheat/melt the converter substrate, setting P0420.
Reported in 4 NHTSA complaints
Parts:catalytic converter lifter
2
Exhaust leak ahead of the downstream O2 sensor
Medium severity
One owner had broken exhaust manifold studs diagnosed on this truck; the resulting leak draws in outside air ahead of the rear sensor and can trigger a false efficiency code.
Reported in 1 NHTSA complaint
3
Failing downstream (post-catalyst) oxygen sensor
Medium severity
One owner's dealer diagnosis on this same platform called for replacing the oxygen sensor alongside the thermostat; a lazy rear sensor commonly mimics low catalyst efficiency.
Reported in 1 NHTSA complaint
Parts:oxygen sensor
4
Worn/aged catalytic converter
High severity
Normal high-mileage degradation of the substrate's precious-metal coating reduces conversion efficiency below the OBD threshold.
Common cause
Parts:catalytic converter
5
Oil/coolant contamination of the catalytic converter
High severity
Oil or coolant reaching the exhaust from internal engine damage can coat and poison the converter.
Common cause
Parts:catalytic converter
6
Upstream O2/air-fuel sensor drift affecting fuel trim
Medium severity
An inaccurate front sensor can push fuel trims rich or lean enough to reduce real catalyst efficiency.
Common cause
Parts:oxygen sensor

Part links go to Amazon search results for this vehicle. As an Amazon Associate, WrenchConnect earns from qualifying purchases — always confirm fitment for your exact trim and engine before ordering.

These causes are aggregated from NHTSA owner complaints and general repair knowledge — this is not a diagnosis. P0420 on your car still needs shop confirmation before any repair.

Common symptoms

Check engine light
Usually no drivability issue
Failed emissions test
Sulfur smell in some cases
Reduced power if converter is clogged

What to check before replacing parts

Check for misfire and fuel trim codes first

Look for: Any active or recent misfire, or lean/rich trim codes, means raw fuel or an off mixture has likely already damaged or is currently overworking the converter — fix those before touching the catalyst.

Inspect for exhaust leaks ahead of the converter

Look for: A leak before the converter (cracked manifold, loose flange, blown gasket) lets in outside air that confuses the downstream O2 sensor into reading as if the catalyst isn't working, even when it is.

Compare upstream and downstream O2 sensor activity

Look for: A healthy converter makes the downstream sensor read flat and steady while the upstream sensor swings actively. If the downstream sensor switches nearly as fast as the upstream one, the converter isn't storing oxygen properly and is likely worn out.

Check converter temperature and performance

Look for: A converter outlet noticeably cooler than expected relative to its inlet under load suggests little catalytic reaction is happening inside — supports a genuinely failed converter rather than a false reading.

Hold off on replacing the converter until root causes are ruled out

Look for: If misfires, exhaust leaks, or fuel trim issues caused this code, a new converter will fail again quickly — confirm those are clean first.

Rather have a pro handle it? Find a vetted local mechanic.

Matching symptoms

Check Engine Light